Replace existing signs

SKU: S-731



Update or replace existing signage on any surface 

While we always imagine our signs and decals last forever, sometimes they become weathered and worn out or the information just needs to be updated. Whatever the reason, there are times when a perfectly good sign just isn't right anymore.

Economical – No need to replace the whole sign, simply place a new decal on top of the existing sign.

Removable or permanent – two options to choose from. Our removable option is easy to apply and remove, and is ideal for short-term use. Whilst our permanent option is designed to last longer outdoors in harsh conditions. 

Customisable – you can add any text, logos, brand colours, shapes or images to your decal to make your signage come to life. Decals can even be cut to shape!

Convenient – easy to install, remove, reposition and reapply without damage to surfaces. No special equipment required to install.

Easy to create – simply choose whether your decal is to be Removable or Permanent, select customise, then follow our easy to use Design Editor.

Can't find what you're looking for? Contact us now for further assistance
03 9882 4905 or 
Removable Easy Dot RPM
Spend $150.00 to receive Free Shipping within Australia!
Design Services
Customer Service
RPM Installation guide
Product Information
Design Services

Our professional designers can help create the look you want and bring your ideas to life.

Contact us now on 03 9882 4905 or Someone from our team will be in contact to discuss your needs.

Customer Service

We're here to help

Have a question? You may find an answer in our FAQs. But you can also contact us on 03 9882 4905 or email

    RPM Installation guide

    All of our repositionable media (RPM) solutions are easy to install, remove, reposition and reapply without damage to surfaces. An information sheet with cleaning instructions and an installation guide will be sent out with every order.  

    Please follow these steps to ensure your RPM installation is quick and easy.

    • Before installation, ensure surface is clean and dry. Allow a minimum of 14 days for any freshly painted surfaces to dry completely. Filler must be dry (if you have recently fixed holes) and any lumps or bumps sanded back before installation as any imperfections will show through when looked at closely;

    • We recommend two people for installation if installing drops larger than 1100mm in width;

    • Peel back the top (approx 200mm) of RPM from the backing sheet and adhere exposed RPM to surface. Using the soft edge of the supplied applicator or a dry cloth, swipe left to right applying even pressure to adhere print. Pull backing away from print as you move down keeping the material taut. Continue moving down, encouraging air bubbles to the edge, until the entire print is adhered to the surface. If twisting or excessive air bubbles occur, lift off and start again;

    • Recycle backing sheet material;

    • Once entire sheet is applied, smooth over with applicator or your hand to ensure there are no air bubbles;

    • If required, trim off excess material (bleed) using a sharp Stanley knife.

    Should you have any questions about installation, or would like a list of accredited installers,
    please contact us on (03) 9882 4905 or email us at

    Product Information
    Product Specifications 

    • Removable is a dot-shaped adhesive coating, allows easy and bubble free positioning
    • Permanent is an ultra high tack adhesive and designed to last longer outdoors - Wet application when installing
    • Outdoor - Weather resistant and UV inks making it suitable to last outdoors (condition will effect life span of product). 

    • 95% blockout opaque
    • We recommend to test the product for suitability of application before applying
    • Surface quality may impact the performance of this product
    • Easy to self-install. Should you have any questions about installation, or would like a list of accredited installers, please contact us on (03) 9882 4905 or email us at

    Environmental Specifications

    • Fire rating certificate
    • All our packaging is recyclable. 


      What's included

      • Applicator tool
      • Information sheet with cleaning instructions and how-to-install guide 

      Artwork Creation

      We can create specific artwork to suit your needs. Our range of artwork services includes onsite measuring, concept development, artwork creation and installation guidelines. As every project is different the cost for these services is job specific. Contact us now on (03) 9882 4905 or email to discuss your needs.