Hot
New

Re-frame RPM (apply to your existing frame) - Customisable

SKU: AC-102

PRODUCT TYPE:

$25.00

Updating artwork and frames can be an expensive, time consuming exercise, and may not be a feasible option for some. You can now easily modernise spaces, personalise areas or create a more home like environment with Re-frame RPM by covering any existing framed artwork with a new print.

Key Features
• Low cost
• Bespoke sizing to suit an existing frame
• Quick and easy to change or remove without damage to the artwork
• Customisable
• No need for any special screws or bolts
• Can be printed with or without a mount around the image
• Re-purpose existing frames

Are you ready to start creating your new artwork? 
Simply choose your mount preference, then select Customise. Our easy-to-use Design Editor will then guide you through some simple steps so that you can customise your print to the size you require.

Can't find what you're looking for? Contact us now for further assistance
03 9882 4905 or sales@thecreativeprinter.com.au 
Spend $150.00 to receive Free Shipping within Australia!
Design Services
Customer Service
RPM Installation guide
Product Information
Design Services

Our professional designers can help create the look you want and bring your ideas to life.

Contact us now on 03 9882 4905 or sales@thecreativeprinter.com.au. Someone from our team will be in contact to discuss your needs.

Customer Service

We're here to help

Have a question? You may find an answer in our FAQs. But you can also contact us on 03 9882 4905 or email sales@thecreativeprinter.com.au

    RPM Installation guide

    All of our repositionable media (RPM) solutions are easy to install, remove, reposition and reapply without damage to surfaces. An information sheet with cleaning instructions and an installation guide will be sent out with every order.  

    Please follow these steps to ensure your RPM installation is quick and easy.

    • Before installation, ensure surface is clean and dry. Allow a minimum of 14 days for any freshly painted surfaces to dry completely. Filler must be dry (if you have recently fixed holes) and any lumps or bumps sanded back before installation as any imperfections will show through when looked at closely;

    • We recommend two people for installation if installing drops larger than 1100mm in width;

    • Peel back the top (approx 200mm) of RPM from the backing sheet and adhere exposed RPM to surface. Using the soft edge of the supplied applicator or a dry cloth, swipe left to right applying even pressure to adhere print. Pull backing away from print as you move down keeping the material taut. Continue moving down, encouraging air bubbles to the edge, until the entire print is adhered to the surface. If twisting or excessive air bubbles occur, lift off and start again;

    • Recycle backing sheet material;

    • Once entire sheet is applied, smooth over with applicator or your hand to ensure there are no air bubbles;

    • If required, trim off excess material (bleed) using a sharp Stanley knife.


    Should you have any questions about installation, or would like a list of accredited installers,
    please contact us on (03) 9882 4905 or email us at sales@thecreativeprinter.com.au

    Product Information

    Product Specifications 

    • 95% blockout opaque
    • Smooth satin surface that reduces glare
    • Micro-suction technology – tiny suction cups formed on one side grip any flat, smooth surface and is repositionable (easy to install, remove reposition and reapply without damage to surfaces)
    • We recommend to test the product for suitability of application before applying
    • Surface quality may impact the performance of this product
    • No magnets or static, so it’s safe to use on electrical surfaces
    • Can be rinsed with water. Allow to dry thoroughly and reapply.
    • Easy to self-install. Should you have any questions about installation, or would like a list of accredited installers, please contact us on (03) 9882 4905 or email us at sales@thecreativeprinter.com.au

     

    Environmental Specifications

    • Environmentally friendly, no PVC and nontoxic
    • Printed with Latex inks, which are non-flammable, non-combustible and produce odourless prints.
    • All our packaging is recyclable. 

       

      What's included

      • Applicator tool
      • Information sheet with cleaning instructions and install guide 
      Pre-loader