Maintain a safe environment for staff and customers with our convenient Antimicrobial Table Signage RPM.
Customisable design – create your own table sign with the option of including personalised QR Codes to sign in, for electronic menus or reviews. Add your company logo, brand colours or any other important text to be printed on your table sign to make it uniquely yours.
Four customisable templates available:
1. Scan QR Code to Sign In
2. Scan QR Code for Menu
3. Scan QR Code to Make A Review
4. Order at the Bar
Hygiene – the protective decal contains antimicrobial agents that inhibit and neutralise the growth of microbes on its surface, killing bacteria and viruses. The Antimicrobial protection is completely waterproof, a non-irritant and compatible with your current cleaning protocols. QR codes on your table signs are also hygienic because menus no longer need to be passed between people, and people can use their own device to sign in.
Two sizes available: 80 x 80mm (60 pack), 120 x 120mm (40 pack)
Convenient – easy to install, remove, reposition and reapply without damage to surfaces. No special equipment required to install. Simply peel back the backing sheet and apply to any smooth surface.
Easy to order, simply select your size, customise, and then follow the easy-to-use Design Editor.
Can't find what you're looking for? Contact us now for further assistance
03 9882 4905 or firstname.lastname@example.org
Our professional designers can help create the look you want and bring your ideas to life.
Contact us now on 03 9882 4905 or email@example.com. Someone from our team will be in contact to discuss your needs.
All of our repositionable media (RPM) solutions are easy to install, remove, reposition and reapply without damage to surfaces. An information sheet with cleaning instructions and an installation guide will be sent out with every order.
Please follow these steps to ensure your RPM installation is quick and easy.
- Before installation, ensure surface is clean and dry. Allow a minimum of 14 days for any freshly painted surfaces to dry completely. Filler must be dry (if you have recently fixed holes) and any lumps or bumps sanded back before installation as any imperfections will show through when looked at closely;
- We recommend two people for installation if installing drops larger than 1100mm in width;
- Peel back the top (approx 200mm) of RPM from the backing sheet and adhere exposed RPM to surface. Using the soft edge of the supplied applicator or a dry cloth, swipe left to right applying even pressure to adhere print. Pull backing away from print as you move down keeping the material taut. Continue moving down, encouraging air bubbles to the edge, until the entire print is adhered to the surface. If twisting or excessive air bubbles occur, lift off and start again;
- Recycle backing sheet material;
- Once entire sheet is applied, smooth over with applicator or your hand to ensure there are no air bubbles;
- If required, trim off excess material (bleed) using a sharp Stanley knife.
Should you have any questions about installation, or would like a list of accredited installers,
please contact us on (03) 9882 4905 or email us at firstname.lastname@example.org
- 95% blockout opaque
- Can be applied on any clean dry surface and is repositionable (easy to install, remove reposition and reapply)
- Dot-shaped adhesive coating allows easy and bubble free positioning
- Clear acrylic pressure activated ultra removable adhesive
- We recommend to test the product for suitability of application before applying
- Surface quality may impact the performance of this product
- May cause damage to painted surfaces when removed
- Contains Antimicrobial Protection 24/7. See our Antimicrobial Protection tab for more information.
- Phthalate free, Prop 65 compliant and fire rated
- Environmentally friendly, no PVC and nontoxic
- Printed with Latex inks, which are non-flammable, non-combustible and produce odourless prints
- All our packaging is recyclable.
- Information sheet with cleaning instructions and how-to-install guide.
Help keep your workplace healthy and safe with Anti Microbial Protection 24/7
This innovative anti-microbial film is made of clear cast PVC with a thickness of 60 microns. It contains anti-microbial agents that inhibit and neutralise the growth of microbes on its surface. This technologically advanced film has been tested by the Pasteur Institute and proven to quickly inhibit bacteria and coronaviruses, preventing their spread.
The protective film reduces coronavirus viraemia by 95% after a contact of 15 minutes, and nearly 99.9% after a contact of one hour. It contains anti-microbial agents that inhibit and neutralise the growth of microbes on its surface killing bacteria and viruses. An affordable approach to high traffic surfaces where hygiene protection is paramount.
Antimicrobial Protection is smooth and sleek, perfectly waterproof, a non-irritant and compatible with your current cleaning protocols. Further, it is resistant to most chemical agents, alcohol, diluted acids and oils, with antimicrobial activity being maintained for up to 365 cleans.