Outdoor signs that are slip resistant and durable!
Whether you are wanting to advertise your brand, promote your event or provide safety advice or directions, our Outdoor Aluminium Signs are perfect to use. Ideal for use at markets, public events, bike paths, shopping strips and car parks, outdoor hospitality spaces and open days.
• Suitable for application to asphalt, concrete and textured surfaces.
• Printed with UV inks making it last in direct sunlight and inclement weather conditions.
• Fully customisable.
• Slip resistance rating of R12.
• Can be cut to shape.
• Easy to self install.
Using our easy to use Design Editor, you will be able to create a custom size, upload any images or print ready files. You can also add any text, shapes or images to make your floor signage come to life.
Can't find what you're looking for? Contact us now for further assistance
03 9882 4905 or email@example.com
Our professional designers can help create the look you want and bring your ideas to life.
Contact us now on 03 9882 4905 or firstname.lastname@example.org. Someone from our team will be in contact to discuss your needs.
All of our repositionable media (RPM) solutions are easy to install, remove, reposition and reapply without damage to surfaces. An information sheet with cleaning instructions and an installation guide will be sent out with every order.
Please follow these steps to ensure your RPM installation is quick and easy.
- Before installation, ensure surface is clean and dry. Allow a minimum of 14 days for any freshly painted surfaces to dry completely. Filler must be dry (if you have recently fixed holes) and any lumps or bumps sanded back before installation as any imperfections will show through when looked at closely;
- We recommend two people for installation if installing drops larger than 1100mm in width;
- Peel back the top (approx 200mm) of RPM from the backing sheet and adhere exposed RPM to surface. Using the soft edge of the supplied applicator or a dry cloth, swipe left to right applying even pressure to adhere print. Pull backing away from print as you move down keeping the material taut. Continue moving down, encouraging air bubbles to the edge, until the entire print is adhered to the surface. If twisting or excessive air bubbles occur, lift off and start again;
- Recycle backing sheet material;
- Once entire sheet is applied, smooth over with applicator or your hand to ensure there are no air bubbles;
- If required, trim off excess material (bleed) using a sharp Stanley knife.
Should you have any questions about installation, or would like a list of accredited installers,
please contact us on (03) 9882 4905 or email us at email@example.com
- 100% blockout
- Shapes and adapts to any surface
- High tack aluminium back adhesive
- Suitable for application to asphalt, concrete and textured surfaces
- Durable on rough roads, unpainted concrete and pavement surfaces
- Outdoor use and is drive-over tough
- Printed with UV inks making it suitable to last outdoors
- We recommend to test the product for suitability of application before applying
- Surface quality may impact the performance of this product
- May cause damage or leave residue on painted surfaces when removed
- Easy to self-install. Should you have any questions about installation, or would like a list of accredited installers, please contact us on (03) 9882 4905 or email us at firstname.lastname@example.org
- Fire rating certificate
- Slip rating R12 certificate
- Can be disposed of with normal aluminium recycling
- All our packaging is recyclable.
- Applicator tool
- Information sheet with cleaning instructions and install guide.